Motopressor Mini Pump With Tyre Gauge

MOTOPRESSOR MINI PUMP WITH TYRE GAUGE

The MotoPressor Mini Pump enables you to pre-select a tyre pressure, pump your tyres and the pump will automatically switch OFF when it reaches the pre-selected pressure. On top of that you have the option to power the pump off a mini jump starter (sold separately), which gives you the mobility to move about with the pump.

Here's how it works. Connect the MotoPressor Mini Pump to either your motorcycle battery OR a mini jump starter. Select a pressure scale either PSI, BAR or KPA. Select the pressure you would like to pump your tyres to. Switch the pump ON, stand back and let the pump do the work. Once the pump reaches the pre-selected tyre pressure it switches OFF automatically. How easy is that.

The kit includes the pump with a digital pressure gauge and all the power leads and connectors to enable you to run off your motorcycle battery or a mini jump starter. All this is packed neatly into a sturdy carry case. Weighs 503g, dimensions 127 x 105 x 53 mm, pumps to a max 100psi and will pump a 120/70 R19 tyre to 36psi in 3min 20sec and a 170/60 R17 tyre to 40psi in 6min 45sec.

The pump has a "screw on chuck" fixed to the end of the hose. If you feel you will not be able to screw the chuck on and off your valve without loosing too much air, then may we suggest buying a Clip-on 90 Degree Valve extension. Screw that onto the end of the hose and you now have a Clip-on chuck.

The pump is CE approved.